Installing and setting up Proxmox Backup Server (VM, hardware, connecting it)

What does a Proxmox Backup Server installation involve?

Proxmox Backup has a server and a client part, and you cannot leave out the server: “You always need a backup server. It is not possible to use Proxmox Backup without the server part.” The documentation recommends the vendor’s ISO image as the way to install it.

In short:

  1. Install the server from the ISO image.
  2. Open the web interface over HTTPS on port 8007.
  3. Create a datastore.
  4. Add the datastore to Proxmox VE as a storage.

Can the backup server run in a VM?

The vendor recommends dedicated hardware. The Get Started page says: “It is recommended that the server runs on dedicated hardware rather than being run as a virtualized instance.” That is a recommendation, not a prohibition.

Nothing in the installation guide, the FAQ, the datastore chapter or the Proxmox VE integration chapter allows or forbids running the server in a virtual machine.

On the hypervisor, the installation guide is more explicit. The backup server can also be installed on Proxmox VE, but that is not recommended: “Installing the backup server directly on the hypervisor is not recommended. It is safer to use a separate physical server to store backups.”

What hardware does it need?

The documentation separates minimums from recommendations. The minimums are “for evaluation purposes only and should not be used in production”.

Minimum (evaluation only)Recommended
CPU64-bit (x86-64 or AMD64), 2 or more coresmodern AMD or Intel 64-bit CPU, at least 4 cores
Memory2 GBat least 4 GiB, plus at least 1 GiB per TiB of storage
Diskmore than 8 GB32 GiB or more free space for the operating system
Networkone network cardredundant multi-GBit/s network cards

For the operating system the documentation names a hardware RAID with a battery-backed write cache or a redundant ZFS setup; ZFS is not compatible with a hardware RAID controller.

How does the ISO installation work?

The documentation also lists an unattended installation with an answer file, installation on an existing Debian (apt install proxmox-backup-server) and installation on Proxmox VE.

The image comes from the vendor’s download page, which listed version 4.2-1 (1.48 GB) on 12 November 2026. It is a hybrid image that you can burn to a DVD or copy to a USB stick of at least 2 GB.

How do I create the install stick on Linux?

The commands come from the documentation “Proxmox Backup 4.2.10-1” and have not been run on a test system.

On Linux the documentation gives a dd command for the stick. Replace the image file name and /dev/XYZ with the right device; it overwrites all data on the stick:

dd bs=1M conv=fdatasync if=./<image-filename>.iso of=/dev/XYZ

What does the installer ask for?

After booting you normally choose “Install Proxmox Backup Server (Graphical)” in the menu. The installer then asks for:

  • Target disk: by default the whole server is used and everything on it is erased. The file system defaults to ext4 (with LVM); xfs and ZFS are selectable. “ZFS on top of any hardware RAID is not supported and can result in data loss.”
  • Password for root and an email address: at least 8 characters, the documentation advises at least 12.
  • Network: during installation either an IPv4 or an IPv6 address, not both.

What do I do after the installation?

After the reboot, open the IP address from the installation on port 8007, for example https://pbs.yourdomain.tld:8007, and log in as root in the Linux PAM realm. The documentation then lists four points:

  • upload a subscription key for the Enterprise repository
  • otherwise set up one of the public repositories
  • check the IP configuration and hostname
  • check the time zone

Subscription costs: Proxmox subscription: tiers, cost, how to buy for Proxmox VE, Is Proxmox Backup Server free? for the Backup Server.

How do I create a datastore?

A datastore is a directory in a standard Unix file system (ext4, xfs or ZFS); at least one has to be configured. In the web interface, “Add Datastore” in the Datastore section creates a datastore, with name, path, schedules and retention options. “Administration > Storage/Disks” lists the disks and creates file systems. On the command line, this lists the disks:

proxmox-backup-manager disk list

How do I create the datastore on the command line?

To create a datastore the documentation gives two independent examples, both named store1. You run one, not both. The first command creates an ext4 file system and a datastore under /mnt/datastore/store1:

proxmox-backup-manager disk fs create store1 --disk sdX --filesystem ext4 --add-datastore true

The second creates only a datastore on the given path:

proxmox-backup-manager datastore create store1 /backup/disk1/store1

How do I connect it to Proxmox VE?

Proxmox VE has integrated the backup server natively since version 6.3. In the web interface you add it under “Datacenter > Storage”. The Proxmox VE manual requires:

  • the server address or DNS name
  • the user name including realm
  • the password
  • the ID of the datastore

The default port is 8007. With a self-signed certificate the fingerprint is required; you read it in the server dashboard or on the command line:

proxmox-backup-manager cert info

Which user do I need on the backup server?

The connection needs a user on the backup server, and “Newly created users do not have any permissions”. The documentation names --email and --password as options of user create but shows no example with a password.

It describes the role DatastoreBackup as “Can backup and restore owned backups”. Its ACL example for that role uses a token of john; in the commands below the user john@pbs gets the role itself:

proxmox-backup-manager user create john@pbs --email john@example.com --password <password>
proxmox-backup-manager acl update /datastore/store1 DatastoreBackup --auth-id john@pbs

The documentation names no role for the connection to Proxmox VE. DatastoreBackup is a natural choice because the role is described for backups.

How do I add the storage on the Proxmox VE command line?

Here store1 is the datastore created above and store2 the storage ID. No value after --password makes the program prompt for it:

pvesm add pbs store2 --server <server> --datastore store1
pvesm set store2 --username john@pbs --password
pvesm set store2 --fingerprint <fingerprint>
pvesm status --storage store2

The storage type pbs knows only the content type backup; Proxmox VE backs up virtual machines at block level and containers at file level.

Sources

Let's talk

Free initial consultation - no sales pitch, just an honest assessment.

Request a consultation →